People who are often engaged in industry know that wire-to-board connectors are used when working, but what kind of connector meets our requirements requires us to carefully choose.
1. How many wires we need to connect if we want to figure it out, what are the specifications of the wiring?
Don’t underestimate such a small problem. It decides which kind of suitable rubber core connector we use. In our actual selection process, there are hundreds of rubber cores to choose, how to choose, and our installation space. It has a non-negligible relationship with voltage requirements.
2. The type of socket should also be considered.
Wall-type sockets are suitable for inserting into the wall. Box-type or panel sockets have the advantage of saving space. They are generally used when no accessories are needed.
3. The function of the same connector is different, how to deal with it.
When four sockets are needed on the same panel, one of them is carrying high current, and the other is carrying ground current. In this case, if you don't know it, it will destroy our expensive equipment.
How to do? It is to order the same type of rubber core arrangement with different angles from the standard. If the key positions of these arrangements are different, this will prevent the mismatch of the plug and socket.
4. Type of plug.
Usually we use straight plugs, but in special cases, we need to use right-angle plugs, that is to say, enter the device at a right angle.
5. The choice of accessories after the plug.
When choosing a wire-to-board connector, the choice of accessories after the plug is straight or right-angled. Both have integrated or separate tail accessories. The integrated type has good strength, and the separate type can quickly check the solder joints.